October 23, 2019

Fish Hook Sharpener Reviews

Fish Hook Sharpeners

It's important to sharpen your fish hooks so that the next big fish doesn't escape. If you're on your fishing trip for hours, then you don't want to wait until you get home to sharpen those hooks. That's why there are sharpeners specifically made for you to take with you on your trips.

When shopping for a fish hook sharpener, be sure to find a portable one. It must be easy to store. If you can make sure they are built for you to conveniently attach them to your person.

Top 5: Fish Hook Sharpeners Review

SE DF401FS Dual Grit Diamond Fishing Hook and Knife Sharpening Stone

This tool features about 200 and 400 abrasive grits, respectively, on each side of the stone. In combination with it being handheld, this makes it easy for you to sharpen your hook on the go. The little cord attachment helps prevent you from dropping your tool on the way to your trip.

The sharpening stone is four inches long, making it compact and convenient. Adding to the convenience is being able to use this tool for both a fishing hook and a knife. You wouldn't have to carry around two different sharpening tools.

SE DF401FS Dual Grit Diamond Fishing Hook and Knife Sharpening Stone

To help you remember which side to use there are grooves. The side with one groove is for your fishing hooks. The opposing side has two grooves, and it's for your knives.

If you want this tool on hand, then the lanyard loop is big enough to fit around your wrist. The handle allows for a firm grip. The two levels of grit abrasion are for sharpening both your fishing hook and knife.


Pros

  • Gets your hooks really sharp.
  • Easy to use.
  • Compact for travel.
  • Can sharpen both fish hooks and knives.

Cons

  • A little pricey.
Dr. Slick Hook File, 2 Sided, Dual Sharpening Grooves, 6", S.S.,w/Diamond surface, Med/Hvy.Grit

The two files each have dual grit, totaling to four different dual grit abrasion levels. One of them is six inches with 150 and 300 grit. The other is four inches with 300 and 600 grit.

These fine, medium and heavy options allow for a wide range of precision. Not only would you be able to sharpen the point but also the side of the hook. Specifically, the grooves are for the point, and the flat part is for the sides.

This tool is made of stainless steel. So no matter how wet it gets, you don't have to worry about it getting rusty. Due to the different levels of grit abrasion, you have more control of sharping your fishing hooks.

The sizes of the files, being four and six inches each, allows for convenient travel. They each come with a lanyard cord attached to them. You could either put them around your wrist or use them as a keychain.


Pros

  • Multiple levels of grip abrasion.
  • Small, convenient size.
  • Lanyard cord for easy attachment.

Cons

  • Two separate tools instead of one.
FIRINER Fish Gripper with Scale and Ruler 3 in 1 Portable Stainless Steel Fish Lip Grabber Tool Set Max 33lbs Weight Scale Including Lure Gear Fishing Hook Sharpener and Lanyard Grip

The fish hook sharpener is more of an extra accessory to the main product. The fish gripper allows for an easy but strong grip of a freshly-caught fish. An additional accessory is a measuring tape.

With the fish grip and measuring tape, you can both weigh and measure the size of your catch. The grip allows for up to 33 pounds, or about 15 kilograms, of maximum measurement of your fish. The ruler measures up to 40 inches.

FIRINER Fish Gripper with Scale and Ruler 3 in 1 Portable Stainless Steel Fish Lip Grabber Tool Set Max 33lbs Weight Scale Including Lure Gear Fishing Hook Sharpener and Lanyard Grip

The gripper allows you to keep a tight grip on this tool. You can use it to firmly grasp the fish, and it won't be able to get away easily. The gripper is made with stainless steel and is anti-corrosive.

Its ease of use allows you to utilize it with one hand. That way, you could use the other for holding the fishing rod or measuring. It comes with a hand strap and carabiner lanyard to help you easily carry around these items.


Pros

  • Multiple tools available in one product, including a fishing hook sharpener.
  • Easy to carry around.
  • Can be used with only one hand.
  • Hook sharpener contains grooves for precision sharpening.
  • Sharpener has lanyard loop for easy attachment around wrist.
  • Small size of hook file allows for easy storage.

Cons

  • Fishing hook sharpener is lacking in grit abrasion levels.
  • You can't buy just the sharpener; you must get the entire set.
  • If you just want the sharpener, the price might be a little high.
Sharpal 102N 5-in-1 Pocket Hunting Knife Sharpener丨Hook Fishing Camping Outdoor Sharpening Stones

Here's another multifunctional tool with a fishing hook sharpener included. There's also a knife sharpener and compass. In addition to fishing, this tool can also be used for camping.

The fishing hook sharpener is a small patch on one of the face sides of the tool. It allows for quick sharpening on the go. You can take it with you on the boat instead of waiting to get home.

This tool is surrounded by gripping material. It allows you to keep a firm grasp on in for sharpening on the water. There's also grip on the top and bottom of the tool to help with sturdiness on a surface while sharpening your knife.

The built-in compass will help you find your way between your campsite and your favorite fishing spot. There's a lanyard hole made for you to set up a lanyard for convenient attachment to you or your equipment. Another feature of the sharpening section of your knife is that it's at an angle.


Pros

  • Brightly colored, making it easy to find among equipment.
  • Contains multiple tools in one that's helpful for both fishing and camping.
  • Handheld and compact.
  • There's a hole for putting a lanyard.
  • Comes with a built in line cutter.
  • Adjustable knife sharpener.
  • Grooves in fish hook sharpener for precision sharpening.

Cons

  • Comes with a lanyard hole, but you have to get your own lanyard.
  • The square, slightly wide shape may make it more difficult to store than a sole fish hook sharpener.
  • The fish file is small.
  • Grit levels do not vary; it's just one level.
Lansky Sharpeners LDFHS Diamond Fish Hook Sharpener

This product has foldable parts to cover the sharpening rod. Once unfolded, these parts serve as a handle you grip onto while working on your hook. These handles are made with rubber to help you make sure it doesn't slip out of your hand while in use.

The grit on the sharpener is made with diamond. That means it can sharpen any kind of metal hook. There are three grooves, each with differing sizes.

The tool is flexible in use. Specifically, it could be used to sharpen both fishing hooks and knives. This is convenient if you're looking to clean and gut the fish soon after catching it.

You'll find that this tool is made with a sturdy, plastic handle. The plastic is covered with rubber for an efficient grip. When the foldable parts are closed, the entire tool is small enough to fit in your pocket or bag.


Pros

  • Foldable and compact.
  • Grit abrasion is made with diamonds.
  • Can be used for both knives and fishing hooks.

Cons

  • Not very many features.

Best Fish Hook Sharpener

In this list, the top pick is the Diamond Fish Hook Sharpener from Lansky. It may not have a lot of extra features, but it has quality grit, is portable and, overall, convenient. There are three levels of grit abrasion for precision sharpening.

Lansky Sharpeners LDFHS Diamond Fish Hook Sharpener

Frequently Asked Questions

How Do You Sharpen a Fish Hook?

What you do is take your sharpener and grind it on the hook. You start from the shaft and go to the point. You do that multiple times until the hook is appropriately sharp.

This is a general tactic, but it can vary by the type of fish hook. Keep in mind that sharpening could remove the coating of the hook, leaving it vulnerable to rust. Regular maintenance, such as checking the hooks and applying oil, could help prevent this.

Newer fish hooks are less likely to dull than old ones. That doesn't mean fishermen should skip out on sharpening their hooks. It's not as much of a chore as it seems and helps elongate the life of your hooks.

If you can, make the switch to newer hooks. They do last longer and are less likely to rust. Just remember to test their points and sharpen them when needed.

It's recommended you get some hooks that are made of bronze or stainless steel. They dull easily, but they also sharpen well. This doesn't mean you should replace your hooks as soon as they dull.

Sharpening your hooks can help you save time and money. You don't have to go to the store to buy more hooks. Invest in a sharpening tool that best suits your needs.

How Do You Test a Sharpness on a Hook?

You take your hook and lightly push it against your thumbnail. If it leaves a mark with little resistance, then it's sharp enough. If not and it keeps slipping away, then it needs to be sharpened.

This is better than finding out the hard way. You could wait until you use the hook while fishing and let a big one escape. With sharp hooks, you're more likely to keep the fish that gets attached.

Keep in mind that newer hooks have a coating on them to help the hook slip through the fish faster. This coating can come off by sharpening. One way to keep your hook coated is by using a permanent marker.

What is a Hook File?

A fish hook file, or sharpener, is a tool used to sharpen fishhooks when they begin to dull. Not many fishermen think about sharpening their hooks, leaving them to dull. Having a small, compact fish hook in their inventory could help them remember better.

That's why fish hooks are small and convenient. They could be made to fit in your tackle box. Additionally, some can be attached to your vest like a keychain.

Files are made using grit, tiny particles of rock used for abrasion. The highest quality grit is made of pieces of diamond mineral since it is a very hard rock that can cut metal more easily than other rocks. There are multiple levels of grit that help sharpen your hooks with precision.

The different levels of grit include light, medium, and heavy. The one you use depends on the size of your hook. Having multiple levels on one tool is convenient because you don't have to carry around more than one sharpening tool for more than one type of hook you have.

Certain hook files are flexible. More specifically, they can sharpen knives as well. Hooks can be sharpened with files made for knives, but it won't be as precise a sharpen.

Having one they could easily take with them on their trip allows them to conveniently sharpen their hooks without having to go home or buy new hooks. Finding out that your hook is dull when you get on the water can be upsetting. That's why so many files are small; they're made for travel.

Tips For Using A Fish Hook Sharpener


It is important to note that the first point of contact between you and the fish is your hook. Therefore, it is essential to keep it sharp. ‘Why spend a lot of money to catch fish because of a dull fishing hook?’


A sharp hook sticks more fish than a blunt one. However, most of the anglers hardly take time to sharpen their hooks. There are several ways in which you can sharpen your hook. You can use either a file or a sharpening stone.


Below are a few points that every angler should have in mind before sharpening their hooks.

• You should not file your hook too much as that will make its tip weak or even break it.
• You should make sure that your hook is air dry once you have cleaned your hook or finished fishing.
• Avoid storing your hooks in dump places or tackle boxes. Doing that will prevent your hook from rusting and make it las longer. It also makes it easier to sharpen.


If you want to buy a new hook, make an effort to buy the best quality one. It will save you money in the long run because it will have a longer life span than a cheap hook. Make sure you replace rusted hooks to avoid injuring yourself with them and to increase your catch.


How To Sharpen Your Hook

If you want to go fishing with a hook that looks brand new, follow these steps when sharpening it:

• Hold your hook firmly in your hand.
• Draw your hook sharpener, either a file or sharpening stone, towards the tip across the barb.
• Repeat those strokes on the opposite side of the hook to ensure equal sharpness on both sides.
• Make your final strokes on the bottom of your hook tip to form a triangular-shaped tip.
• Finally, test your hook for sharpness.


How To Achieve A Triangular Shaped Hook Point

• File the tip of the hook flat on the outer side- When sharpening your hook, you want to make sure that you achieve a triangular point. That way, it will be easier for your hook to cut into the fish's jaw.

To achieve that triangle shape at the point of your hook, start by filing the outside or the back of the tip flat.


• File one side of the hook at a 45 degree or right angle- The second step in achieving the triangular-shaped hook tip is to file one side of the inside of the hook tip at a right angle towards the flat back you had sharpened earlier. That is the beginning of the cutting side of the hook tip.


• File the other side at the same angle- File the other side of the inside of the hook tip at the same 45-degree angle you sharpened the other one. That will bring out the desired triangular shape of the hook point.


If you are sharpening your hook at home, then hold your hook in a fly-tying vise. However, if you are sharpening in the field, you will have to hold the hook carefully on your hand and make sure it does not prick you.


• Touch-up the tip- Once you are on the water, you mostly have to touch-up the tip of your hook as that will make it needle-sharp, and it will be easier to cut through the fish's jaw. It is cheaper and faster to touch up the tip than tying it on a brand new hook.


Once you are done sharpening your hook, it is essential to color the freshly sharpened tip with a permanent marker or any permanent ink. That will help reduce the amount of corrosion on your hook, guaranteeing that your hook will last longer.


Testing Your Hook For Sharpness

The simplest most common way of testing if your hook is sharp is placing the tip on either your thumbnail or the surface of your finger. Do not press down the hook. Slowly drag the hook across either of those two surfaces.


If the hook digs in your nail or finger skin, then it means that it is sharp. However, if it just slides down without any mark or without the tip chipping your skin, it needs to be sharpened a second time.

Final Verdict

You may only be looking for a fishing hook sharpener. The other tools and features of the other previously-mentioned products may already be a part of your inventory. Visit this link and purchase the product to add to your collection of must-have fishing tools.


Related Product Reviews

Reference & Resources


pets

Click Here to Leave a Comment Below

Real Freebies - March 29, 2021 Reply

fantastic points altogether, you just gained a brand new reader. What would you suggest about your post that you made some days ago? Any positive?

    Crave Freebies - March 29, 2021 Reply

    Heya i am for the first time here. I came across this board and I find It truly useful & it helped me out a lot. I hope to give something back and aid others like you helped me.

Leave a Reply: